Ukufakwa kwe-Belt Conveyor kuvame ukwenziwa ngezigaba ezilandelayo.
1 Faka uhlaka lwebhande lokudlulisa ukufakwa kohlaka luqala kusuka kuhlaka lwekhanda, bese lufaka amafreyimu aphakathi wesigaba ngasinye ngokulandelana, bese ekugcineni ufaka ifreyimu yomsila. Ngaphambi kokufaka uhlaka, i-Centerline kumele idonswe kulo lonke ubude besihambi. Ngoba ukugcina inqwaba yesihambisi emugqeni oqondile yisimo esibalulekile sokusebenza okujwayelekile kwebhande lokuhambisa, lapho lifaka umugqa ngamunye womugqa, nakancane ukwakha ishelufu lokulinganisa. Iphutha elivumelekile lohlaka oluya emugqeni wesikhungo ngu- ± 0.1mm ngemitha ngayinye yobude bomshini. Kodwa-ke, iphutha lesizinda sohlaka ngaphezulu kobude bokuhambisa akumelwe ngedlule 35mm. Ngemuva kwazo zonke izingxenye ezizodwa zifakiwe futhi ziqondaniswe, isigaba ngasinye singaxhunyaniswa.
2. Faka idivaysi yokushayela lapho ufaka idivaysi yokushayela, ukunakekelwa kufanele kuthathwe ukwenza i-drive shaft yebhande lokuhambisa i-perpendicular ku-conveyor yebhande, futhi i-axis of the ducer ihlangana nge-axis axis parallel. Ngasikhathi sinye, yonke imithamo kanye nama-roller kufanele adalwe. Iphutha elivundlile le-axis, ngokusho kobubanzi besihambisi, livunyelwe ngaphakathi kwebanga le-0.5-1,5mm. Ngenkathi ufaka idivaysi yokushayela, amadivaysi angenyanyensi anjengamasondo omsila angafakwa. I-axis ye-pulley yedivayisi yokungenisa intshiseko kufanele ibe nge-perpendicular emgqeni wesikhungo sebhande lokuhambisa.
3. Faka i-Idler Rollers ngemuva kohlaka, kufakwa idivaysi yokuhambisa idivaysi, i-Intler Roller racks engaphezulu futhi ephansi ingafakwa i-arc egobile eshintsha i-arc egobekile kancane, futhi ibanga phakathi kwama-roller racks esigabeni sokugoba kujwayelekile. 1/2 kuya ku-1/3 yebanga phakathi kwama-roller ozimele. Ngemuva kokuthi i-Idler Roller ifakiwe, kufanele ijikeleze kalula nangokuphamba.

I-4. Ukuqondanisa kokugcina kwebhande lebhande ukuze kuqinisekiswe ukuthi ibhande lokuhambisa lihlala ligijimela phakathi kwama-roller kanye nama-pulley, lezi zidingo ezilandelayo kufanele zihlangane lapho ufaka ama-roller, ama-racks nama pulleys:
1) Bonke abakwa-idler kumele bahlelwe ngemigqa, befana komunye nomunye, futhi baqhubeka nokuvundlile.
2) Onke ama-roller abhalwe phansi.
3) Isakhiwo esisekelayo kufanele siqonde futhi siqonde. Ngalesi sizathu, ngemuva kokuthi i-drive roller kanye nohlaka lwe-idler ifakiwe, i-Centerline kanye nezinga le-conveyor kufanele ekugcineni liqondaniswe.
I-5. Ngemuva kwalokho lungisa i-rack kwisisekelo noma phansi. Ngemuva kokuthi i-Belt Conveyor ilungisiwe, ukondla nokulayisha amadivayisi angafakwa.
I-6 I-Winch yesandla engu-0.5-1.5t ingasetshenziswa ukulengisa imichilo. Lapho uqinisa ibhande ngokuxhumana, i-roller of the tensioning divayisi kufanele ihanjiswe endaweni yemali, kanye ne-trolley kanye nedivayisi yokufuna ukuguquguquka kufanele kudonswe ekuqondisweni kwensiza yokudlulisela; Ngenkathi idivaysi eqondile ye-mensiensing kufanele isuse i-roller phezulu. Ngaphambi kokuqinisa ibhande lokuhambisa, ukuncishiswa kanye nemoto kufanele kufakwe, bese kufakwa idivaysi yokubopha ku-conveyor ethambekele.
7 Emnyangweni wokuhlola oku-Idling, kufanele ukhokhelwe ukuthi ngabe kukhona ukuphambuka ngesikhathi sokusebenza kwebhande lokuhambisa, okushisa kwengxenye yokushayela, i-activity yoxhumana naye phakathi kokusebenza, kanye nomshini wokuhlola onomthwalo ungayenziwa kuphela ngemuva kwazo zonke izingxenye zingejwayelekile. Uma kusetshenziswa idivaysi yokulinganisa i-mensiensing, ukuqina kufanele kulungiswe futhi lapho umshini wokuhlola ususebenza ngaphansi komthwalo.